DEVICE UMTS (Subscriber Station)
REGULATION DG DECREE NUMBER 5 YEAR 2019
ETSI EN301908-1
ETSI EN301908-2
     
NR. TEST ITEM LIMIT
1 Frequency Range (Radio Frequency Band)
Band 3GPP Frequency Uplink
SS (Tx) − BS (Rx)		 Frequency Downlink
SS (Rx) − BS (Tx)
I 1920 − 1980 MHz 2110 − 2170 MHz
VIII 880 − 915 MHz 925 − 960 MHz
2 Channeling
  UARFCN Frequency
Uplink Nu = 5* (FUL − FUL_OFFSET) FUL_low ≤ FUL ≤ FUL_high
9612 to 9888 MHz 1922.4 to 1977.6 MHz
Downlink ND = 5* (FDL − FDL_OFFSET) FDL_low ≤ FDL ≤ FDL_high
10562 to 10838 MHz 2112.4 to 2167.6 MHz
3 Maximum Channel Power
Operating Band Power Class 1 Power Class 2 Power Class 3 Power Class 4 Power Class 5
  Power (dBm) Tol*) (dB) Power (dBm) Tol*) (dB) Power (dBm) Tol*) (dB) Power (dBm) Tol*) (dB) Power (dBm) Tol*) (dB)
Band I +33 +1/-3 +27 +1/-3 +24 +1/-3 - - +21 +2/-2

*) Tol = Tolerance
4 Frequency Error ±0.01 ppm
5 Spurious Emission
Frequency Bandwidth Measurement Bandwidth Minimum Requirement
9 kHz ≤ f < 150 kHz 1 kHz -36 dBm
150 kHz ≤ f < 30 MHz 10 kHz -36 dBm
30 MHz ≤ f < 1000 MHz 100 kHz -36 dBm
1 GHz ≤ f < 12.75 GHz 1 MHz -30 dBm
6 Sensitivity
Operating Band Unit DPCH_Ec[REFSENS] [REFIor]
I dBm / 3.84 MHz -117 -106.7
Note 1: For power class 3 and 3bis shall be at the maximum output power
Note 2: For power class 4 this shall be at the maximum output power
7 Emission Mask
Δf in MHz (Note 1) Minimum Requirement (Note 2) Measurement Bandwidth
Relative Requirement Absolute Requirement
2.5 − 3.5 {-35-15.((Δf/MHz)-2.5)}dBc -71.1 dBm 30 kHz (Note 3)
3.5 − 7.5 {-35-1.((Δf/MHz)-3.5)}dBc -55.8 dBm 1 MHz (Note 4)
7.5 − 8.5 {-39-10.((Δf/MHz)-7.5)}dBc -55.8 dBm 1 MHz (Note 4)
8.5 − 12.5 -49 dBc -55.8 dBm 1 MHz (Note 4)

Note 1: Δf is the separation between the carrier frequency and the centre of the measurement bandwidth.

Note 2: The minimum requirement is calculated from the relative requirement or the absolute requirement, whichever is the higher power.

Note 3: The first and last measurement position with a 30 kHz filter is at Δf equals to 2.515 MHz and 3.485 MHz.

Note 4: The first and last measurement position with a 1 MHz filter is at Δf equals to 4 MHz and 12 MHz
8 Occupied Bandwidth (OBW) ≤ 5 MHz (OBW < 5 MHz)
9 Adjacent Channel Leakage Power Ratio (ACLR)
Power Class Adjacent Channel Frequency Relative to
Assigned Channel Frequency		 ACLR Limit
3 +5 MHz or -5 MHz 33 dBm
3 +10 MHz or -10 MHz 43 dBm
4 +5 MHz or –5 MHz 33 dBm
4 +10 MHz or -10 MHz 43 dBm
10 Power Supply SS (Subscriber Station) operating with SELV (Safety Extra Low Voltage) in an environment that allows overvoltage of the telecommunications network. SELV refers to a voltage that does not exceed 42.4 V peak or 60 V DC